Pioneer International

Product Description:
 

The STANLEY POWERiT 1200 Peak Amp Jump Starter/Power Station is a universal power station with serious jump-starting power. With up to 1200 Peak Battery Amps, this unit can start up even V8-powered cars and trucks with ease. The 120 PSI compressor comes with a brass-tipped, Sure Fit nozzle and Autostop functionality for easy "set-and-forget" inflating. You can power mulitple electronics and smartphones with the AC outlet and USB charging ports, or use the attached worklight for easy repairs even after dark.

 It also includes integrated safety features like a reverse polarity alarm.

Product Description:
 

800W, 10,000 rpm provides high power and speed for 100mm grinding applications

Advanced fan system provides maximum airflow prolonging motor life

Sealed toggle switch provides protection from dust and filings extending switch life

Tool-free adjustable guard allows easy positioning for left or right handed use

Spindle lock for quick and easy disc changes

Compact gear case allows use in tight and confined areas

Accessible brushes for easy brush replacement and less downtime

Product Description:
 

12 amp AC/DC, 11,000 rpm motor provides high speed for fast material removal

High power-to-weight ratio for greater efficiency and reduced user fatigue

Adjustable guard can be adjusted to redirect sparks away from user

Rear handle design for greater comfort and control

External brush caps for easy servicing

Sealed ball and roller bearings for extended motor life

This product runs off of AC/DC power

Product Description:
 

Abrasion protected motor for increased durability

Two Position side handle allows the user to optimize handle position to give maximum comfort

Spindle Lock for quick wheel changes

Brush window allows quick brush replacement

Product Description:
 
Bevels 0°-48° to the left and 0°-3° to the right for increased capacity
0°-50° left and right miter capacity for greater versatility
15 Amp motor, 4,000 rpm delivers extended power and durability
Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts
Cam lock miter handle with detent override deliver quick and accurate miter angles
Precise miter system and machined base fence support optimize cutting accuracy
4 Hardened Steel Bevel Stops at 0°, 33.9°, 45° and 48° delivers versatility at most common bevel angles
Lightweight (35lbs), built-in carrying handle for increased portability
Warranty: 2 Year warranty provided by the manufacturer from date of purchase

Product Description:
 
Powerful heavy duty professional machine: 6-25 Joule - 11.0kg)
Vibration reduction rear handle
Storage Case
5m rubber cable
SDS-max chuck

Product Description:
 
Electronic restart protection
Lock-on switch
Spindle lock
Adjustable open safety guard
3m rubber cable

Product Description:
 
Hitachi G14DSL - 115mm, 14.4V Cordless Angle Grinder is one of the best cordless angle grinders available in the market. This Hitachi angle grinder is slim and comes with a soft grip to enhance the ease of usability. It is amazingly lightweight and compact and easy to carry. This tool is highly too. The massive 4.0Ah Li-ion battery provides longer life for every single charge. The other features include the remaining battery indicator lamp, replaceable carbon brushes for longer life and depressed centre wheel. Hitachi G14DSL is a reliable cordless tool which performs in combination with battery and charger. In short, it is a highly dependent and remarkable angle grinder.

Product Description:
 
High power and speed for grinding applications
Advanced fan system provides maximum airflow prolonging motor life
Sealed toggle switch provides protection from dust and filings extending switch life
Tool-free adjustable guard allows easy positioning for left or right handed use
Spindle lock for quick and easy disc changes
Compact gear case allows use in tight and confined areas
Accessible brushes for easy brush replacement and less downtime

Product Description:
 
Unleash the nextElectronic Disc Grinder with Brushless Motor G 23BYE The Industry's First" 230mm Disc Grinder with Highly Efficient and Durable Brushless Motor Brushless Motor Outstanding Grinding Performance*2. Less Fatigue with Lighter Weight". 
Lightest in its Class" 
Depressed center wheel sold separately. 
High Level of 1. As of December 2018. Among 230mm disc grinders made by leading power tool manufacturers. (Survey by Koki Holdings) *2. Vs. the existing model G23SW2 Disc Grinder. 

Product Description:
 
140 Watts to power and recharge personal electronics
(2) 120 AC power outlets
(1) USB power outlet
3 ft DC plug cord for ease of use
Plugs directly into vehicles 12V DC Accessory Outlet
Low battery shut down prevents total battery drain
Includes Mounting Kit

Product Description:
 

It has a powerful 800 watt motor with 3 mode function (Rotary drilling, Hammer drilling and chipping)

It has a variable speed trigger for total control and forward and reverse option

Rotation-stop for light chiseling applications in brick, soft masonry and occasionally concrete

Electronic variable speed for total control in any application

Mechanical clutch eliminates sudden high-torque reaction should the bit jam

Rounded ergonomic industrial design allows easy and comfortable handling in any application

Ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26 mm in diameter

2 years warranty from the date of invoice (does not cover products that are improperly used, abused, altered or repaired, nor does it cover consumable good such as knife blades, Screwdriver Bits, etc.)

Product Description:
 
It is a 550 watt corded drill with 10mm chuck capacity
Variable speed switch control to suit different materials
"Lock on" button gives the user the option to keep the machine continually running when doing repetitive operations
Trigger sensitive variable speed switch allows a user to drill slowly for precision accuracy when starting to drill a hole
An excellent power to size ratio results in a powerful, durable drill in a compact size
Improved sealing for maximum protection from dust ingress ensuring long tool life
Compact ergonomic design enables comfortable one handed use and allows access to tight spaces. It is ideal for drilling holes in Metal, Wood and Plastic

Product Description:
 

Low weight ensures the drill is easy to use and it reduces user fatigue

Compact design enables comfortable use and allows access to tight spaces

An excellent power to size ratio results in a powerful, durable drill in a compact size

Trigger sensitive variable speed switch allows a user to drill slowly for precision accuracy when starting to drill a hole

Rubber back handle increase comfort to the user in drilling and hammer drilling applications

"Lock on" button gives the user the option to keep the machine continually running when doing repetitive operations

Product Description:
 
120 Watts to power and recharge personal electronics
(1) 120 AC power outlet
(1) USB power outlet
Features silent running technology
3 position plug for ease of use
Plugs directly into vehicles 12V DC Acessory Outlet
Low battery shut down prevents total battery drain

Product Description
 
Single function (drilling)
Compact design
Left/right rotation
Variable electronic speed control
3m rubber cable

Product Description:
 
In comparison with the conventional model WR14VB.
Test Condition : Extension cord, length 100m (50m cord x 2) which having 2.0mm² nominal cross-sectional area of conductor.
(Test condition is just for explanation about difference of the tools. Please use the appropriate extension cord.)
370W of brushless motor is equivalent to 440W of brushed motor
According to EPTA-Procedure 01/2003.
The tri-axial vibration values were measured according to EN60745.

Product Description:
 
The product life cycle is significantly extended by eliminating troubles with armature burnout, layer short or commutator wear in severe environments. No carbon brush replacement is required.Power supply and load conditions are continually monitored to provide stable torque even with an extension cord used.Allows quick switching between forward and reverse modes.

Product Description:
 
Designed for threaded stud cutting
Cutting of threaded studs: 2.3 sec.
Clean cutting without sparks, chips and noise
Various kind of cutters : W3/8, W5/16, M10,M8,M6
Includes 2 slide Lithium-ion battery and charger

Product Description:
 
20-stage Clutch
Keyless Chuck
LED Light
The remaining battery indicator lamp shows not only charge level but also battery overheating and failure when they occur

Product Description:
 
3 Operation Modes (Screw-tightening / Drilling /Impact Drilling)
20-stage Clutch
Keyless Chuck
LED Light

Product Description:
 
Users feel less fatigue due to the compact, lightweight and well-balanced design with most of the weight positioned close to the hand.
With BSL1850C Battery (inc. Side Handle)
The DH18DPA is suited for drilling small holes into concrete, completing the job faster than corded counterparts.
 

Product Description:
 
The Ferm COM1007P Chop Saw provides the power that every professional needs to get the job done correctly and efficiently. The powerful 2300-watt motor produces a no-load speed of 4000 RPM and cuts with ease through pipes, tubes, shaped steel, metal bars etc.
With the adjustable back fence, you can set the machine at an angle of 45 to 90 degrees, so it’s possible to saw in several directions. This professional 14" Chop Saw has a spindle lock for easy blade change, an adjustable spark deflector and a lock-off button to prevent accidental starting. The work piece is clamped with a Quick lock vice so you can work safely. The Ferm Professional COM1007P comes with a saw blade (suitable for metal) and a wrench so you can get started right away!

Product Description:
 
Overheat protection
Stationary mode
2 Heat and air flow settings
2 Nozzles included
3m Cable
Storage case

Product Description:
 
This cordless impact driver from the FERM Industrial line is suitable for daily intensive and professional use as it is manufactured of high quality components. This battery-powered impact driver has a 4-pole Mabuchi® motor and is smaller, more powerful and more constant in speed compared to 2-pole motors. This impact screwdriver also has high quality bearings of the Japanese NSK® brand. The battery cells comes from the brand Samsung®.
This screwdriver is part of the FERM Industrial FI20V platform which means that the batteries and charger are interchangeable with all machines within the platform. This impact driver comes in a robust storage case containing two 2.0Ah Li-Ion batteries, a quick charger and two screwdriver bits. 

Product Description
 
Angle and depth adjustment
Spindle lock
Lock-off safety switch
High quality blade included
3m rubber cable

Product Description:
 
Charger  UC7SL
 (For Cassette Type)
For 7.2V cassette type Lithium-ion battery model BCL715
Rapid charging
Charging Voltage: 7.2V
Rechargeable Batteries: BCL715
Temperatures at which the battery can be recharged: 0 - 50°C
Weight: 0.35kg
7.2V and 1.5Ah-capacity Lithium-ion battery
Charging time: Aprrox. 30 min.
( Charger : UC7SL / At 20°C )
The figures of battery capacity are nominal values
The charging time may vary according to temperature and power source voltage.

Product Description:
 
Max lock torque: 10Nm (89in.-lbs.)
LED light
6.35mm (1/4") hexagon chuck
Adjustable clutch: 21-stage torque
Compact and lightweight at 0.8kg
Soft grip handle
Includes cassette Lithium-ion battery and charger

Product Description:
 
Smooth cutting by orbital locus
Tool-less blade change by lever
LED light illuminating blade edge
3 kinds of orbital action or straight cut
Dust blowing for clear view over cut line
Soft grip handle
Remaining battery indicator lamp
High capacity 5.0Ah* Lithium-ion battery
Includes slide Lithium-ion battery and charger
Guide and Dust Collection Adapter as optional

Product Description:
 
2 Batteries (BSL1450 or BSL1430), Charger (UC18YFSL), 2 Blades, Blade Settings Gauge, Guide (with set screw), Wrench, Battery Cover, Carrying Case

Product Description:
 
2-mode action: Rotation only mode, Rotation and hammering mode
2-mode power: Save mode for small bit and Power mode for large bit
High capacity 5.0Ah Lithium-ion battery
Includes slide Lithium-ion battery and charger
New design to decrease grease leaks
Slim and soft grip handle
LED light on body
Remaining battery indicator lamp

Product Description:
 
Convertible to use in angled or straight
3.6V and max lock torque: 5Nm (44in.-lbs.)
Spindle lock mechanism
Adjustable clutch: 21-stage torque
Equipped with Battery Protection Circuit
Includes 2 cassette Lithium-ion batteries and charger
LED light on body

Product Description:
 
Suitable for cutting a 2 x 4 piece and max cut depth : 40mm(1-9/16") at 45° and 57mm (2-1/4") at 90°
High capacity 5.0Ah Lithium-ion battery
Includes slide Lithium-ion battery and charger
Fine cutting adjustment at 90° by screw
Magnesium saw cover
Light illuminating blade edge

Available while inventory lasts.

Product Description:
 
Power input 600W
Cylindrical housing for durability
Offset of chuck: 28mm
Variable speed by trigger
Reversible by lever switch
Keyed chuck or keyless chuck available by areas

Product Description:
 
Compact and lightweight at 1.8kg
High capacity 5.0Ah Lithium-ion battery
Includes slide Lithium-ion battery and charger
Wheel dia 115mm
Slim and soft grip perimeter 182mm
Slide switch
Replaceable carbon brush for longer service life
Remaining battery indicator lamp

Product Description:
 
For collated screw strips
Capacity for drywall screws: Dia 4mm and length 25-41mm
Durable "automatic screw feeding mechanism" for long service life
Screw-feed reversible by button
Angle adjustable hook

Product Description:
 
Soft grip for easier handling
28 piece pccessory kit for various applications
Variable speed trigger to suit multiple drilling applications
Forward and reversible for convenience

Product Description:
 
The brushless motor offers a significantly extended product life cycle by eliminating trouble including armature burnout, layer short or commutator wear even in severe work environments. Besides, no carbon brush replacement is required.
The friction ring holds a socket on the anvil, making it easier to install a pin and O-ring to securely lock the socket in place.
Note : It is possible to temporality hold the socket in place with the friction ring, but be sure to insert the pin and attach the O-ring before use. If the power tools is used while the socket is temporarily held in place, the socket may fall off and cause an injury.
Large charge indicator lamp with 4 color status LED and sound alert once charging is complete
USB port (5V 2A)
Capable of charging at low temperature (-10°C and above)